Maltech m5 eco как настроить

2 M5 – Eco CE INTRODUCTION Dear Client! Thank you for your choice. With the purchase of this Maltech plaster sprayer you have chosen one of the most modern machines in the sector.

3 M5 – Eco CE CONTENTS I N T R O D U C T I O N . 2 C O N T E N T S .

4 M5 – Eco CE GUARANTEE AND MODIFICATIONS Guarantee MALTECH offers a guarantee of a year from delivery of the apparatus for the single production machine, as established by law. For the validity of .

5 M5 – Eco CE REGULATIONS RELATING TO THE USE AND MAINTENANCE MANUAL If the use and maintenance manual of the MALTECH machine is not understood by the operator because of language barriers, it w.

6 M5 – Eco CE Symbols on the machine The following symbols (references or also pictograms) are applied to the machine and indicate dangerous areas and situations. These references (pict.

7 M5 – Eco CE GENERAL SAFETY REGUL ATIONS The following general safety regulations and the information contained in the present manual need to be followed completely to guarantee safe functionin.

8 M5 – Eco CE Protective goggles Protective goggles must be worn during working to protect the eyes from possible spurts of material. Pollution from dust An increase in pollution from du.

9 M5 – Eco CE Transport In case of transporting the components of the plant, it is necessary to make sure that they are sufficiently protected and that a suitable means of transport has been .

10 M5 – Eco CE First start-up of the machine It is necessary to read the present manual in detail before starting-up and using the plant. The regulations contained within must be rigorously kept in mind. .

11 M5 – Eco CE The hoses must not have breaks or bottlenecks so that the material contained can flow freely. If, in spite of all the procedures having been carried out correctly, ano.

12 M5 – Eco CE It is necessary to check on the manometer that the pressure has been completely emptied out before removing a hose. The pressurised tubing must be completely emptied, depending .

13 M5 – Eco CE TECHNICAL DATA Identification plaque The type, the model, the series number and the year of construction are shown on the identification plaque. If the plaque is.

14 M5 – Eco CE RANGE OF NORMAL USE The range of normal use of the machine will be described in this chapter. An analysis of the dangers relative to these uses has been carried out. Other u.

15 M5 – Eco CE TR ANSPORTING One of the amazing characteristics of the MALTECH M5-Eco plaster sprayer is the simple handling, obtained thanks to light, but at the same time robust, co.

16 M5 – Eco CE DISMANTLING Description of the points needed for dismantling the machine into its single parts. First turn off all the function keys and the switches on the electrical box.

17 M5 – Eco CE FIRST START-UP The present manual must be read and understood in detail before starting-up and using the machine. The machine is supplied complete on a pallet with hoses u.

18 M5 – Eco CE Installing the pumping unit The pumping unit, dispatched separately from the rest, can be installed after installing the mixing chamber. To do this turn the mixing ch.

19 M5 – Eco CE STARTING-UP The procedures for starting-up the machine are described in the following paragraph. Positioning Position the machine on a flat and stable base and make sure that it.

20 M5 – Eco CE Water connection Two water connections have been envisaged on the machine. The main connection (1) supplies the water needed for mixing. The secondary connection (2) is .

21 M5 – Eco CE Control elements Main electrical cabinet Main switch: Turning on the main switch provides power to the machine, which is, therefore, ready f.

22 M5 – Eco CE Controls for the direction of rotation Check that the direction of rotation is correct before using the machine. If not, the machine may suffer damage. Procedure: After having tur.

23 M5 – Eco CE If the pump motor does not rotate, check the electrical connections and the position of the main switch in the electrical box. If the pump still does not rotate even with all.

24 M5 – Eco CE It is possible that the hose that transports the mixed material to the sprayer becomes obstructed if there is an insufficient quantity of water. This can cause grave wear to th.

25 M5 – Eco CE A manometer for the pressure of the mortar must be mounted between the pump outlet and the transport hose as an additional control device. This manometer supervises a.

26 M5 – Eco CE USE It is possible to start when the machine is ready for use. Check the machine before every use. In particular, check that all the protective covers are integral, mounted and fixed. .

27 M5 – Eco CE If there is insufficient pressure in the jet, examine the air nozzle for possible obstructions and both hoses for possible bends. In the case of obstruction the parts must.

28 M5 – Eco CE ENDING WORK AND CLEANING In the case of ending the work or interruptions longer than 20 minutes (10 minutes if using rapid binding material) the machine must be turned off and c.

29 M5 – Eco CE The next step is to turn the machine on for about 30 seconds. At the same time it is possible to clean the shaft with a jet of water. Note: If there is a blackout.

30 M5 – Eco CE The ball will emerge from the other end of the hose. Repeat the procedure a sufficient number of times to eliminate all the dirt. After cleaning, empty the hose carefully of any possible remai.

31 M5 – Eco CE The material entrance (A) of the mixing chamber and relative container must also be cleaned. Procedure: Tilt the mixing chamber upwards and use the blocking lever (1) to .

32 M5 – Eco CE MAINTENANCE The necessary maintenance procedures are described in the following paragraph. Carrying out regular and periodical maintenance very much extends the life of the m.

33 M5 – Eco CE Screw and rotor The rotor and the screw must undergo a maintenance cycle if irregularities in the pressure or changes in the thickness of the material are met during .

34 M5 – Eco CE SOL VING PROBLEMS Attention! The machine must be turned off, disconnecting the power by removing the plug from the socket, before any intervention (cleaning, maintenance, repair). .

35 M5 – Eco CE SPARE PARTS Modifications, changes or other tampering with the mixing plant are absolutely forbidden. Possible problems for special work must be solved without intervenin.

Источник

maltech M5-Eco Manuals

1 User Guides and Instruction Manuals found for maltech M5-Eco

maltech M5-Eco Use And Maintenance Manual (35 pages)

Document Information:

• Manufacturer: maltech
• Product Name/ID: M5-Eco / #1391602
• Category: Paint Sprayer
• Document Type: Use And Maintenance Manual
• File Path: maltech/m5-eco_1391602.pdf
• Last Updated: 03 Oct 2021
• Pages: 35

Pages Preview: