Не работает модлоадер террария

Не работает модлоадер террария

При игре с модами через tModLoader объем допустимой памяти для модов составляет 4 ГБ, в гайде подробно описано как задействовать всё ОЗУ вашего ПК.
Так же это работает и для мультиплеера.

When playing with mods via tModLoader, the amount of allowed memory for mods is 4 GB, the guide describes in detail how to use all the RAM on your PC.
This also works for multiplayer.

3,741 уникальных посетителей
62 добавили в избранное

Террария 32-битная игра и соответственно ModLoader тоже сделан под 32. В 32 битной системе нельзя задействовать больше 4 ГБ оперативной памяти.
Мы же с вами будем апать tModLoader в 64-разрядную версию.

Terraria is a 32-bit game and, accordingly, ModLoader is also made for 32. In a 32-bit system, you cannot use more than 4 GB of RAM.
We are going to up tModLoader to the 64-bit version.
——————————————————————————
Ссылки и пути установки\Links and installation paths::

Вам ведь нужны пруфы? Вот вам пруфы\You need proofs, right? Here are the proofs:

1. Переходим на гитхаб разработчика и скачиваем 64-битную версию лоадера.
Находится внизу страницы, нас интересует tModLoader64bit.zip
Go to the developer’s github and download the 64-bit version of the loader.
Located at the bottom of the page, we are interested in tModLoader64bit.zip

2. Открываем путь игры и закидываем поверх файлы из архива с заменой.
У нас будет два новых ярлыка (выделены на скрине)
Open the path of the game and throw over the files from the archive with the replacement.
We will have two new shortcuts (highlighted in the screenshot)

2.5 Если у вас видеокарта AMD, советую после скачать tmodloader_x64_vulkan.zip и закинуть поверх tModLoader64bit. Производительность заметно улучшится.

If you have an AMD graphics card, I advise you to download tmodloader_x64_vulkan.zip afterwards and put tModLoader64bit over it. The performance will improve markedly.

3. Добавляем tModLoader64bit в библиотеку стим, для этого нажимаем в стиме внизу слева «Добавить игру» — «Добавить стороннюю игру» и указываем путь к tModLoader64bit.

Add tModLoader64bit to the steam library, for this, click in the Steam at the bottom left «Add game» — «Add a third-party game» and specify the path to tModLoader64bit.

4. Запускаем tModLoader64bit. И смотрим в левый нижний угол, если вы видите следующее:
Launch tModLoader64bit. And look in the lower left corner if you see the following:
Значит у тебя все получилось, похлопай себе
И, пожалуйста, не забудь поставить оценку этому гайду.

So you did it, give yourself a pat
And, pls, don’t forget to rate this guide.

Источник

Не работает модлоадер террария

3,136 уникальных посетителей
27 добавили в избранное

На самом деле всё очень просто. Вам необходимо вступить в официальный Discord [discord.gg] сервер tModLoader, перейти в раздел Announcements, и найти там длинное сообщение от jopojelly, где под чёрной обводкой будет указан код, который вы должны будете скопировать с помощью Ctrl+C.

  • Почему бы сразу не скинуть код сюда?

Разработчики попросили не отправлять этот код и перенаправлять людей на их дискорд сервер, в котором находится важная информация о нестабильности данной версии (её мы потом затронем)

После того, как вы скопировали код, заходим в библиотеку Steam.
Находим tModLoader, нажимаем «Свойства»:

Переключаемся на вкладку «Бета-версии» и вставляем с помощью Ctrl+V полученный код в поле, после этого нажимаем «Проверить код» и нажимаем на появившуюся синюю кнопку «Вступить»:

После этого у вас должна начаться загрузка дополнительных файлов. Подтверждением того, что у вас теперь 1.4 Alpha, будет префикс после tModLoader в библиотеке:

Нажимаем на кнопку «Играть», у нас должна появиться командная строка, после чего запустится сам tModLoader 1.4:

Как вы видите, это действительно 1.4 версия, и теперь все кнопки отвечающие за моды находятся в меню «Мастерская»:

Две нижние кнопки — из оригинальной Terraria, предназначены для загрузки миров и ресурспаков (на момент написания гайда загрузка ресурспаков и миров в Мастерскую пока не поддерживается), правая центральная кнопка пока что ни за что не отвечает, кнопка Develop Mods — для разработчиков модов и она вам не нужна, по итогу остаётся 2 кнопки — браузер модов и управление модами.

По аналогии с 1.3, загрузка модов и их инстанция остались прежними:

Но также появилась и новая возможность — теперь моды можно загружать не только с бразуера модов, но и из самой мастерской Steam:

Если у вас остались какие-либо вопросы, напишите в комментариях, разберёмся.

Источник

Terraria 1.3.5.3 error (tmodloader v0.11.80

[13:50:54] [1/INFO] [tML]: Starting tModLoader v0.11.8 Windows client (07.06.2021)
[13:50:54] [1/INFO] [tML]: Running on NetFramework 4.6.1
[13:50:54] [1/INFO] [tML]: Executable: D:\Catalyst\Terraria\Terraria_v1.3.5.3 (2).exe
[13:50:54] [1/INFO] [tML]: Working Directory: D:\Catalyst\Terraria
[13:50:54] [1/INFO] [tML]: Launch Parameters:
[13:50:54] [1/DEBUG] [tML]: Assembly Resolve: -> MonoMod.RuntimeDetour, Version=20.11.16.1, Culture=neutral, PublicKeyToken=null
[13:50:54] [1/DEBUG] [tML]: Assembly Resolve: MonoMod.RuntimeDetour, Version=20.11.16.1, Culture=neutral, PublicKeyToken=null -> MonoMod.Utils, Version=20.11.16.1, Culture=neutral, PublicKeyToken=null
[13:50:54] [1/DEBUG] [tML]: Assembly Resolve: MonoMod.RuntimeDetour, Version=20.11.16.1, Culture=neutral, PublicKeyToken=null -> Mono.Cecil, Version=0.11.3.0, Culture=neutral, PublicKeyToken=50cebf1cceb9d05e
[13:50:55] [1/DEBUG] [tML]: Assembly Resolve: -> Ionic.Zip.Reduced, Version=1.9.1.8, Culture=neutral, PublicKeyToken=edbe51ad942a3f5c
[13:50:55] [1/DEBUG] [tML]: Assembly Resolve: -> Newtonsoft.Json, Version=10.0.0.0, Culture=neutral, PublicKeyToken=30ad4fe6b2a6aeed
[13:50:56] [1/INFO] [tML]: Checking GOG or manual installation.
[13:50:57] [1/FATAL] [tML]: Terraria.exe is not the unmodified Terraria executable.

GOG installs must have the unmodified Terraria executable to function.

If you patched the .exe, you can create a copy of the original exe and name it «Terraria_v.exe»

Прочти руководство по установке, проверь, всё ли правильно. Насчёт gog версии не знаю.
https://github.com/tModLoader/tModLoader/wiki/tModLoader-guide-for-players#manual-installation

А вообще, легче всего купить в стиме и скачать модлодер через мастерскую

Источник

Не работает модлоадер террария

tModLoader 64-bit will open up more abilities for a near-unlimited* capacity in order to mix and match more mods of larger sizes!!

As of version 0.11.7.8.1, released on 21st December 2020, the way you install and play tModLoader 64-bit has changed — please be sure to do a fresh install of your game and follow this guide again if you are playing with a version prior to this release.

* — You still have a memory limit. It’s connected to the amount of Total Physical Memory you have.

36,519 уникальных посетителей
702 добавили в избранное

We were getting too many comments about questions that have already been answered for in the guide already or repeated time and time again, or simple fixes that take common knowledge to solve. IF you have an issue read the guide FIRST before making any sort of comment within the Discord server.

If you have issues, please DO NOT add any authors of this guide or message on their profile page. We use Steam for many reasons, and trouble shooting personal problems is not one of them; that is the Discord’s purpose and this guide’s purpose.

If you still happen to have any issues that ARE NOT in this guide, please join the Discord found under «Additional Resources», thank you.

It’s amazing to see that Terraria’s unofficial mod ‘tModLoader’ has finally been officially endorsed and ported over to Steam as it’s own little feature, a big Re-Logic seal of approval, however, there are a few things that can limit the experience of users such as the infamous ‘4GB memory limit’ or mods throwing a tantrum which can lead to a browser crash.

In a solution to some of these issues, there has been a developer working on and creating a 64bit port of tModLoader which overhauls the game and provides a solution to some of the issues faced, while also giving the user more memory to play with, so long as they have the RAM to spare.

Some work needs to be done, however, to get this version of tModLoader to work, and this guide aims to support you through the process of downloading, installing and troubleshooting anything you will need support with, else, providing you with the necessary resources and tools you may need.

Hi, I’m an admin on the tModLoader 64-bit discord and work directly with Dradonhunter11 in making sure everything runs smoothly.

This gets the seal of approval from our team, I guess.

As mentioned above, you need to own a legal copy of Terraria and for both Terrarria and tModLoader to be installed and be unmodified. Once you have both applications installed, you can then proceed with the rest of the guide.

Self-explanatory. The base game is required to play the modified version of Terraria, let alone vanilla Terraria.

You’ll need to install the base 32-bit version of tModLoader to be able to modify and work on installing the 64-bit version.

• 64 Bit Operating system *Windows*
• 4GBs of RAM (Minimum)

Firstly, you’d have to make your way over to the tModLoader64bit GitHub page [github.com] , making sure you are looking at the latest release of tML 64-bit; there would be a green tag on the left that should read «Latest release» — in this case it’s version 0.11.8.1 as of 3rd March 2021, as shown below.

Once you’re viewing the correct version, make your way to the bottom of the release where it’s labelled «Assets», it should look something like below. This is where you should make a choice depending on your hardware.

  • Most people should be able to use and install the first link labelled «tModLoader64bit.zip».
  • If your system is running off a AMD GPU or isn’t very powerful, use the second link labelled «tmodloader_x64_vulkan.zip».

Whichever .zip you have chosen to download, be sure to let it fully install before progressing further. Be sure you are installing either the top two zip files, and not the Source Code.

If for whatever reason you cannot or do not want to install through GitHub, you can instead install through MEGA where you can find the same files.

Due to Steam policy against pirating and MEGA links, I cannot directly share the link in this guide, so to find it please instead go to the Terraria Forum’s post ‘[1.3] tModLoader FNA (32bit/64bit) (Branch of tML) [forums.terraria.org] ‘ by Dradonhunter11, and under the «Downloads» heading you can find a link to the download files. Within this area, you can also find an alternative route to find the GitHub page as referenced above.

Once the zip folder has been downloaded, you’ll need to unpack/extract (vel unzip) the folder and it’s contents. If you don’t have a program like WinRAR or 7zip you can select the ‘Extract All’ option when you right-click the zipped folder, and then selecting ‘Extract’ in the new window.

Open the new folder where you extracted the contents of the zipped folder, it should have the same name, and select all items inside and select cut.

Methods to select the files:

  • Highlight all the files in the folder.
  • Select the top file, scroll the bottom and select the last file while holding SHIFT.
  • CTRL + A

Methods to cut the files:

  • Right-click on the files you have selected and select ‘cut’.
  • CTRL + X while you’re highlighting the chosen files.

Once you have cut the files, open the tModLoader folder, right-click anywhere within the folder and select ‘paste’, otherwise, you can press CTRL + V on your keyboard. You may be prompted to replace files, and if this is the case you will want to select the option to ‘Replace the files in the destination’.

If done correctly, the directory for tModLoader should look like below.

If you feel as if you do not need to install the Vulkan version of tModLoader 64-bit, please skip this step!

If you need to install the Vulkan version of tModLoader 64-bit, please be sure you have completed the installation steps above for ‘tModLoader 64-bit’!

Installing the additional files required for the Vulkan version is pretty easy and simple. Download the ‘tmodloader_x64_vulkan.zip’ file, unpack/extract (vel unzip) the folder and it’s contents. Open the new folder where you extracted the contents of the zipped folder, it should have the same name, and select all items inside and select cut.

Once you have cut the files, open the tModLoader folder, right-click anywhere within the folder and select ‘paste’, otherwise, you can press CTRL + V on your keyboard. You may be prompted to replace files, and if this is the case you will want to select the option to ‘Replace the files in the destination’.

If done correctly, the directory for tModLoader should look like below.

If you want to play the 64-bit version of tModLoader, there’s been a change in how you launch it since version 0.11.7.8.1 (21st December 2020) — no longer is it dependant on using the launcher for the 32-bit version of tModLoader. You don’t need to do this step, but it is recommended if you’d like to launch tML 64-bit more efficiently.

In order to add tModLoader 64-bit to your Steam Library, you need to do the following steps:

  1. Open your Steam Library and in the bottom-left corner select the ‘Add a Game’ button.
  2. A drop down menu will appear. Select the ‘Add a Non-Steam game. ‘ button.
  3. A window will appear with a list of programs, ignore them and select ‘Browse. ‘.
  4. Your File Explorer should open, from here you should make your way to your tModLoader directory and select ‘tmodLoader64bit.exe’
    • [. ]/steamapps/common/tModLoader
  5. Select ‘open’ in the bottom-right of the File Explorer. It should close.
  6. Select ‘Add Selected Programs’, the middle button at the bottom the the «Add a Game» window. It should close.
  7. Searching for ‘tModLoader’ in your Steam Library should show a new application called ‘tModLoader64Bit’.

Once you have completed the tasks above, you should now be ready to launch tModLoader. When doing so, the load up will look different as to how it may normally, which is perfectly normal and how it will look, launching a console which will look similar to below.

Do not close this console, as doing so will cause tModLoader 64 bit to close. Once Terraria has opened, you should be met with the tModLoader logo, and at the bottom left on the main menu, you should see the text «Running in tML 64 bit mode» or similar next to the version number.

If you’re unable to access the Mod Browser, please try again later and check your connection to the browser servers, else, you are able to install mods directly by going to a forum post within https://mirror.sgkoi.dev/ and saving the .tmod files within to the directory below:

    C:\Users\YOURNAME\Documents\My Games\Terraria\ModLoader\Mods

Remember to enable the mods you want and disable the mods you don’t want and to «Reload» the mods to ensure that the intended mods work.

With that said, enjoy playing tModLoader with much larger memory size, and have fun!

If you have an issue with tModLoader which crashes before it can load the main menu, hold left shift while loading which will skip loading the mods. Once you have, disable most of your mods, reload the mods, and test to see if the problem is still happening.

If it is still happening, continue the loop of disabling more suspect mods, reloading and testing.

If there are no more mods in the list, then there is a potential error with tModLoader which would need to be reported to the developers, by following the Discord at the bottom of this Guide.

If the problem doesn’t occur after testing, enable the mods in your list one (1) by one (1) until the problem reappears. Once it does, take note of the mod that has caused the issues and report it to the developers, by following the Discord at the bottom of this guide, else, comment below the mod for me to test and forward on your behalf.

If your character(s) are getting corrupted, the world isn’t loading, the world backup isn’t loading, the game crashes upon entering the world, or issues similar, follow the steps above by disabling half the mods, reloading, testing and seeing if the issue still occurs, or if it’s caused by a single mod.

Ripped directly from the tModLoader 32bit Discord server.

I’d recommend Verifying the Integrity of Game Files (tModLoader > Properties > Local Files > Verify Integrity of Game Files) and try to reinstall 64-bit tModLoader.

This is usually the work of a faulty mod — see 64-bit tModLoader’s incompatible or unstable mods at the bottom of this guide. To find out which mod is causing this, you should be able to access the logs folder, and it should be just over the error you had encountered in the window that appeared.

If you’re unable to find the mod, share the log file within the 64-bit tModLoader Discord server, else, jump to ««I have a problem with tModLoader»«.

If this occurs, then you have potentially attempted to unsuccessfully uninstall the 64-bit version of tModLoader or unsuccessfully attempted to replace it with the 32-bit version of tModLoader, or your Terraria directory has the vanilla game files, typically via verifying files.

If you planned to uninstall the 64-bit version of tModLoader/revert to 32-bit tModLoader, then you should wipe all the files under tModLoader and the verify your files (Right Click tModLoader > Properties > Local Files > Verify Integrity of Files)

Note: This can also occur even with the vanilla versions of Terraria and tModLoader.

Follow the solutions to «System.BadImageFormatException: An attempt was made to load a program with an incorrect format».

Note: This can also occur even with the vanilla versions of Terraria and tModLoader.

Follow the above solution for «House Banner Missing» — «Verify Integrity of Game Files. » for Terraria and tModLoader.

In short: Yep, provided both of you are on the same version of tModLoader.

You’re able to play multiplayer, both dedicated servers and via connecting to a friend hosting it off their PC, if you are playing on a 64 bit client but your friend isn’t, then your friend has to host the server and decide the mods since the 32 bit player is limited in ram, you can then just normally connect to your friend.

When tModLoader 32 bit pushes an update through Steam, Steam will only modify files that are native to tModLoader. This will include the executable file, but none of the DLLs that tModLoader relies on. Thus, the game will fail and a BadImageFormat exception will occur. Unfortunately, you will either have to switch to 32-bit tModLoader or wait for a new version of 64-bit tModLoader to be released.

As mentioned in the Common issues section, you can move to your tModLoader installation folder,

  • Steam Properties > tModLoader > Properties > Local Files > Browse Local Files

Select everything in that folder and delete it. From there, moving back through Steam Properties,

  • Steam Properties > tModLoader > Properties > Local Files > Verify Integrity of Local Files

You will see a message similar to «X files failed to validate and will be reaquired». Once this text box is closed, steam will redownload tModLoader 32 bit again and your copy should be back to normal.

Источник

Читайте также:  Не работает автоматический аэрозольный
Оцените статью