Time selection reaper не работает

It seems very easy to Insert —> Empty Space At Time Selection to add an empty space with the time of the time selection and have it placed at its start but I can’t find a way to time-select an area and remove that time from the project.

Any help would be greatly appreciated cheers 🙂

Time selection: Remove contents of time selection (moving later items)

The advantage of that action is that you don’t have to first select all items in Arrange.

But, If OP just wants to delete the area falling into Time Selection without moving later items, there even seems to be no native way to do that in Reaper.

Ideally there should be be an Action for that case : «Time selection: Remove contents of time selection»
But that doesn’t exist.

Therefore, i made a custom action:

So this Action will delete the area falling into Time Selection, without moving later items and without the need to first having to select all items in Arrange.

Maybe there are easier ways to accomplish this, dunno ATM.

Источник

Time selection reaper не работает

No it’s NOT the same.

Just program the 2 custom actions for yourself and test it;
The fact that you just have to hoover over (point on) an Item with these 2 custom actions
to make a Time Selection, makes the workflow way smoother and faster than first having to mouse click on Items.
Just my 2 cents though :0)

There is already a native action:

Time selection: Set time selection to items, to do it with just hover you’d just combine into a macro:

Item: select item under mouse cursor (leaving other items selected)
Time selection: Set time selection to items

Then just mash that while hovering over items.

The video makes it more complex than it has to be by thinking of time selection start and end, when that is already covered by the items we’re selecting.

There is already a native action:

Time selection: Set time selection to items, to do it with just hover you’d just combine into a macro:

Item: select item under mouse cursor (leaving other items selected)
Time selection: Set time selection to items

Then just mash that while hovering over items.

The video makes it more complex than it has to be by thinking of time selection start and end, when that is already covered by the items we’re selecting.

ctrl+double click already does this for me. It’s probably the default, because I always used alt+space for that, which was a cubase default macro of loop and play, and then I press space to stop it again, everytime, which makes it a stupid macro.

Ctrl+double click makes a lot of sense though. I gotta remember that.

In Preferences, do a search for «link loop points to time selection»

I have the toggle for this bound to ‘L’ because when I’m tracking, I will often want to set the loop area larger than the record area, for punching in takes, whether it is to fix something or to add backups or what have you.

That way I can have a nice loop that counts me in but I record smaller file sizes, and have less editing to do later.

You may have set it for that reason, or perhaps to use the time selection as an editing selection tool, without disturbing your loop range.

Источник

Time selection reaper не работает

I want to be able to marquee select items and have the time selection be set to the selected items. So far there is only a mouse modifier that selects the items and sets the time selection to the actual area that is marquee’d and not the items that are selected. Is this possible? It seems the only way would be to combine a marquee select mouse modifier with an action to set the time selection to selected items, but i’m not sure how or if I can do that.

Essentially, I want to be able to link all item selections with the time selection (like what I am used to, and prefer, in Pro Tools). I’ve been able to replace the default media item left click mouse behavior with an action to set the time selection to the selected item, however I can’t seem to get it working when trying to select multiple items.

This is actually a very good question, but sorry to say, (currently) NOT possible ala Protools style.
Maybe it would be possible with some kind of script but here’s the problem:

In mouse modifiers > Arrange > right mouse drag : there isn’t an action like «Marquee select items and set Time to selected items»

If this action WAS available, you were set :0)

If i were you, i would put it in as a feature request ; i can see the very usefullness of your wish.

So currently, what you want takes two steps:

1) right drag mouse over items. (assuming you didn’t change the default behaviour for «arrange view — right drag»
2) execute action: Time Selection : set time to selected items.

Источник

Time selection reaper не работает

I’m in the middle of tracking a band and all of a sudden I can’t highlight and area to remove it. Usually, I click and drag and it highlights the area in white, and I can do stuff like right click and select «insert empty space in selection» or «remove selection» etc., but now when I click and drag it won’t highlight an area in white. Any ideas? I’m thinking I probably accidentally changed a setting or something in the preferences box or option drop-down menu.

ALSO. I am doing gapless playback for another project, and I want to have negative space between tracks so it doesn’t do the slight hiccup before the next track starts (which it does hiccup sometimes with using markers and burning the disk straight from REAPER using the markers as new tracks). Any ideas?

That happened to me only once. user error.

I had zoomed in too far, so the snap settings didnґt allow me to drag a time selection.

Somehow it started working again.. strange

But how do I do negative space when mastering a project? Can’t find info on that ANYwhere

Ya, I know how to do it when one track is involved, but how do you do it for an EP or album? I always bounce all the project’s tracks to .wav files, then put them in one project, and use markers as tracks, and burn as an audio cd for gapless playback. How do I do negative space for more than one track in the same project?

I think you’re talking about an obsolete feature that used to be used with the CD format. This would let you edit the «pause space» (extra space between tracks).

The concept was that the song file itself would be trimmed to play ‘correctly’ as a single and then any needed extra blank space for a proper segue would be handled by the pause space. An example that makes more sense might be a live album. You’d put the stage banter introducing the song in the pause space so you’d hear it in context when listening to the whole album but the song would start right at the 1st note when skipping to it or playing just the one track. During the pause space time, you see the hardware CD player clock counting backwards.

A bug in one of the earlier CD authoring apps is responsible for the ability to make that ‘secret track’ pause space you need to scroll back from the start of the 1st song to hear. (The bug being the ability to make this more than the intended 2 seconds and put recorded content there.)

Note that this system does nothing to eliminate errors (hiccups) or allow gapless vs. not gapless. Content is determined 100% by the song file itself. This is merely a system that used to be recognized by hardware CD players to affect where the index points go.

‘Hiccups’ or glitches between tracks (what people used to refer to as ‘lack of gapless playback’ or ‘sector boundary errors’) was a common problem with early bug riddled software. This was never a thing that you needed a ‘feature’ to prevent, it was straight up corrupt software with verifiable bugs.

If you still want to support this obsolete format for the couple older machines some of your listeners might have, you’ll have to find an older CD authoring app that lets you edit these pause space values.

Make your final 24 bit (original sample rate) masters first. (This is priority one and what you want people to hear.)
Edit your final master so the segues between tracks are proper. (ie. Make the best choice for the starting point if content segues like a live recording for example.)

Make the reduced quality portable master next for the 16 bit format (CD) and further destruction to mp3.
Same segues/indexes editing, just reduced quality for the format.

Now make a 3rd «special pause space» CD master.

IMPORTANT
Understand that when anyone rips that CD to wav files (ie. anyone that listens to their media with a computer or portable device), the pause spaces you make (where the hardware CD player is counting backwards) will be appended to the end of each track they come after.

That means when you get creative with that live album and put the stage banter intro to a song in the pause space, the previous song will now end with that segue section. Kind of an awkward transition to the current non-use of this feature.

Источник

AlteraK.RU

Настройка Reaper, вопросы и ответы!

В данном топике выложены все самые основные вопросы и ответы по работе Cockos Reaper. Дополняется.

Настройка Reaper, вопросы и ответы!

Сообщение Alterak » 27 сен 2014, 11:46

На момент изучения этого секвенсера мне приходилось постоянно копаться в интернете, дабы найти ответы на свои вопросы, в итоге решил составить полный перечень ответов, взятый с разных источников, на часто (да и редко тоже ) задаваемые вопросы по настройке программы, работы в ней, визуального оформления и.т.п.

Итак, начнем с самой программы, которую можно скачать на нашем сайте (старая версия 4.72), программа с таблеткой внутри, либо качаем на официальном сайте самую свежую версию программы. Можете пользоваться официальной версией, ограничений на использование этой daw никаких нет, единственное, при запуске программы у вас будет висеть окно с лицензионным соглашением и приглашением приобрести программу, в течении 5 секунд, ну а по юридическим правилам, согласно этого соглашения, вы просто обязаны приобрести ее через 60 дней использования . Надеюсь совесть у вас есть-)
Ну а теперь собственно и сами ответы:

1. Имеется ли встроенный Bridge в хосте?

Посмотрите это видео

Сообщение Alterak » 28 сен 2014, 23:54

Примеры сайдейна средствами рипера:

Сообщение Alterak » 21 окт 2014, 09:06

Где скачать русификатор для Reaper?

Сообщение Alterak » 15 мар 2015, 09:21

Как удалить дорожку автоматизации?

Сообщение Alterak » 17 мар 2015, 07:59

После сдвига локаторов зацикливания переключается курсор проигрывания

Сообщение Alterak » 03 авг 2015, 22:05

Отключить привязку курсора к локатору зацикливания:

seeking-> seek on loop point change

Как изменить цвет темы?

Сообщение Alterak » 01 сен 2015, 09:31

Как создать кнопку для быстрого добавления инструмента?

Сообщение Alterak » 05 сен 2015, 15:45

Необходимо создать Actions, который будет состоять из 3-х основных этапов:
1. Создание новой дорожки.
2. Добавление на новую дорожку необходимого инструмента.
3. Открытие инструмента (при необходимости).
Затем создаем саму кнопку (в моем случае на новой панели), по нажатию которой создаться новая дорожка с указанным инструментом.
Так же в последующем можно создать дополнительные этапы, которые добавят иконку, цвет, имя дорожки и.т.п.
Ну и конечно же весь процесс создания данного Actions и заветной кнопки на видео
https://youtu.be/bIMtUBC0Nb0

Если у вас есть желание немного модифицировать экшн, то можно добавить такие команды:

Первая — добавляет дорожку
Вторая — активирует запись, только когда выделена дорожка
Третья — добавляет на дорожку сам инструмент
Четвертая — активирует и открывает инструмент
Пятая — делает возможным объединять запись (НЕ перезаписывать)
Шестая — активирует входы со всех миди каналов (пока не работает)

Последняя команда, которая активирует MIDI вход к сожалению не работает по неизвестным причинам, вероятно это ошибка разработчика, надеюсь в последующих версиях она будет работать.

Источник